Body na spoluautora | Body za publikaci pro MU | Odkaz ISVaV | 11,63 | 46,53 | Limitations and possible improuvements of DLC dielectric response model based on parameterization of density of states
|
1,86 | 16,73 | Mechanical and microwave absorbing properties of carbon-filled polyurethane
|
0,00 | 0,00 | Laser ablation time-of-flight mass spectrometry (LA-TOF-MS) of silicon doped diamond-like carbon (DLC-Si)
|
0,00 | 0,00 | Study of the Mechanical Properties of Diamond-like Carbon Coatings on Polymer Substrates
|
16,67 | 33,33 | Relationship between effective ionic radii, structure and electro-mechanical properties of zirconia stabilized with rare earth oxides M2O3 (M = Yb, Y, Sm)
|
0,00 | 0,00 | Thermal Desorption Spectroscopy Study on Diamond-like Carbon Coatings
|
0,00 | 0,00 | Atmospheric Pressure Glow Discharges and Their Applications
|
0,00 | 0,00 | Actinometry for understanding PECVD of thin films from O2/HMDSO plasmas
|
0,00 | 0,00 | FUNCTIONALIZATION OF CARBON NANOTUBES IN LOW PRESSURE CAPACITIVE COUPLED RF DISCHARGE
|
2,03 | 12,20 | Hydrophylisation of non-woven polypropylene textiles using atmospheric pressure surface barrier discharge
|
8,04 | 40,18 | Influence of substrate material on plasma indeposition/sputtering reactor: experiment and computer simulation
|
0,00 | 0,00 | Lokální modifikace povrchu plazmovou tužkou
|
0,00 | 0,00 | Gold carbides laser ablation synthesis and mass spectrometry
|
8,90 | 53,41 | Surface modification of polyethylene and polypropylene in atmospheric pressure glow discharge
|
1,56 | 4,68 | Study of the mechanical properties of thin films using combined nanoindentation and AFM measurements
|
0,00 | 0,00 | Thermomechanical stability of the p-i-n solar cells studied by DSI technique
|
0,00 | 0,00 | Thermal stability of diamond like carbon thin films prepared using plasma enhanced chemical vapor deposition
|
8,90 | 44,52 | Thermal stability of the optical properties of plasma deposited diamond-like carbon thin films
|
2,51 | 12,56 | Thermal stability of SiOxCyHz films prepared by PECVD
|
0,00 | 0,00 | Modification of polymer surfaces using atmospheric pressure barrier discharges
|
0,00 | 0,00 | Mechanical stability of the p-i-n solar cells studied by indentation method
|
0,00 | 0,00 | Influence of silicon, oxygen and nitrogen admixtures on the properies of plasma deposited amorphous diamond-like carbon coating
|
0,00 | 0,00 | Influence of the temperature on properties of plasma polymerised organosilicon coatings
|
0,52 | 3,12 | Měření mechanického napětí v tenkých vrstvách pomocí kombinované optické metody
|
0,00 | 0,00 | Mechanical properties of amorphous and nanocrystalline silicon thin films on flexible substrates
|
0,00 | 0,00 | Mechanické vlastnosti plazmově deponovaných tenkých vrstev na různých substrátech
|
4,45 | 26,71 | Influence of technological conditions on mechanical stresses inside diamond-like carbon films
|
1,34 | 6,72 | Optical measurement of mechanical stresses in diamond-like carbon films
|
0,00 | 0,00 | Plasma enhanced CVD of hard DLC/SiOx coatings from methane and hexamethyldisiloxane
|
0,00 | 0,00 | REFRACTORY METAL FILM DEPOSITION BY THERMIONIC VACUUM ARC METHOD
|
0,00 | 0,00 | Possibilities of the Depth Sensing Indentation Test
|
0,00 | 0,00 | Preparation and study of protective coatings deposited on polycarbonate substrate bz PECVD
|
0,00 | 0,00 | Protective Coatings Deposition on Paper by Atmospheric Pressure Surface barrier Discharge
|
0,00 | 0,00 | Plasma Modification of Paper by Means of Surface Barrier Discharge
|
0,00 | 0,00 | Electrical and dielectrical properties of SiOxHyCz thin films prepared by PECVD
|
1,79 | 12,56 | Enhancement of mechanical properties of PP-HMDSO/HMDSZ films by means of thermal annealing
|
0,00 | 0,00 | Complex study of the mechanical properties of a-Si:H and a-SiC:H thin films
|
0,00 | 0,00 | Electrical Properties of SiOxHyCz Coatings Prepared by PECVD
|
0,00 | 0,00 | Electrical Properties of Plasma Deposited Thin Films
|
0,00 | 0,00 | Effect of Heat-Treatment on the Microstructure, Microhardness and Corrosion of Cast Mg-3Sn-2Ca Alloy
|
26,81 | 53,63 | Comparison of structure and mechanical properties of SiO2-like films deposited in O2/HMDSO pulsed and continuous plasmas
|
0,00 | 0,00 | Depth sensing indentation at nano- and microscale
|
11,65 | 46,61 | Complex study of mechanical properties of a-Si : H and a-SiC : H boron doped films
|
0,00 | 0,00 | Deposition and Characterisation of Nanostructured silicon-oxide Containing Diamond-like Carbon Coatings
|
0,00 | 0,00 | Effect of changes in composition and defect structure of crystalline Sm-doped ZrO2
|
0,00 | 0,00 | Depozice nanokrystalických diamantových vrstev metodou PECVD v mikrovlnném reaktoru typu ASTEX
|
0,00 | 0,00 | Deposition of thin films at higher substrate temperatures in atmospheric pressure glow discharge
|
1,37 | 1,37 | Comparison of evaluating methods of thin films nanohardness
|
0,00 | 0,00 | Deposition and Characterisation of Nanostructured silicon-oxide Containing Diamond-like Carbon Coatings
|
1,18 | 8,24 | Deposition of teflon-like protective layers in surface discharge at atmospheric pressure
|
1,65 | 8,24 | Deposition of organic polymers at higher substrate temperatures in atmospheric pressure glow discharge
|
0,00 | 0,00 | Deposition of protective couatings in RF organosilicon discharges
|
0,00 | 0,00 | Influence of postanneling on structure, hardness and residual stress of TiB2 superhard coatings
|
0,97 | 6,81 | Influence of Silicon, Oxygen and Nitrogen Upon the Properties of Plasma Deposited Amorphous Diamond-like Carbon Coatings
|
11,65 | 46,61 | Mechanical properties of thin silicon films deposited on glass and plastic substrates studied by depth sensing indentation technique
|
0,00 | 0,00 | Mechanical properties of nanostructured composite diamond films prepared by PECVD enhanced by RF induced DC self bias
|
0,00 | 0,00 | Modeling of DLC Optical Properties Based on Parameterization of Density of States
|
0,00 | 0,00 | Mechanické vlastnosti nanokrystalických diamantových vrstev
|
0,00 | 0,00 | Mechanical properties of the tungsten thin film deposited by thermionic vacuum arc (TVA) method
|
0,00 | 0,00 | Mechanical properties of nanocrystaline diamond films
|
1,46 | 8,76 | Modification of Polymer Surfaces Using Atmospheric Pressure Barrier Discharges
|
0,00 | 0,00 | Laser Ablation Time-of-Flight Mass Spectrometry (LA-TOF-MS) of “Nitrogen Doped Diamond-Like Carbon (DLN) Nano-Layers”
|
1,03 | 6,18 | Microwave PECVD of nanocrystalline diamond with rf induced bias nucleation
|
0,00 | 0,00 | Properties of the Carbon Thin Films Deposited by Thermoionic Vacuum Arc
|
4,12 | 8,24 | Poole–Frenkel conductivity in SiOxHyCz coatings prepared by PECVD
|
0,00 | 0,00 | Nanocomposite Diamond-Like Carbon Coatings Studied by AEM and Depth Sensing Indentation Test
|
10,88 | 43,54 | Characterization of non-uniform diamond-like carbon films by spectroscopic ellipsometry
|
0,00 | 0,00 | NUCLEATION AND PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION OF ULTRANANOCRYSTALLINE DIAMOND FILMS ON DIFFERENT SUBSTRATES
|
15,24 | 60,95 | Modeling of optical constants of diamond-like carbon
|
1,04 | 9,36 | Porovnání různých plasmochemických procesů s ohledem na teplotu plynů
|
6,75 | 20,26 | Phase composition-dependent physical and mechanical properties of YbZrO solid solutions
|
1,19 | 8,30 | Optimisation of mechanical properties of plasma deposited graded multilayer diamond-like carbon coatings
|
0,00 | 0,00 | Soustava s ultrahydrofobními vlastnostmi, stavební a přírodní zábavný a/nebo relaxační element
|
3,15 | 15,76 | Surface morphology of amorphous hydrocarbon thin films deposited in pulsed radiofrequency discharge
|
11,76 | 47,05 | Comparative Study of Films Deposited from HMDSO/O2 in Continuous Wave and Pulsed rf Discharges
|
9,73 | 19,45 | Characterization by nanoindentation and Scanning Electron Microscopy of the spin valves structuresprepared by Thermionic Vacuum Arc (TVA) method
|
4,95 | 29,68 | Correlation of thermal stability of the mechanical and optical properties of diamond-like carbon films
|
0,00 | 0,00 | Comparative study on several micro and nanoindentation techniques including AFM
|
4,13 | 28,90 | Deposition of protective coatings in rf organosilicon discharges
|
0,48 | 4,80 | Deposition and Characterization of Nanostructured Silicon-Oxide Containing Diamond-Like Carbon Coatings
|
0,00 | 0,00 | Deposition of thin films on glass substrate in atmospheric pressure glow discharge
|
0,00 | 0,00 | Deposition of Protective Coatings in Surface Barrier Discharge at Atmospheric Pressure
|
0,00 | 0,00 | Deposition and analysis of thin films produced in atmospheric pressure glow discharge
|
0,00 | 0,00 | Deposition of protective hydrophobic coatings in atmospheric pressure surface barrier discharge
|
0,00 | 0,00 | Effect of changes in composition design on properties and defect structure of crystalline Sm-doped ZrO2
|
0,00 | 0,00 | The instrumented indentation test - powerful tool in development of new materials
|
0,00 | 0,00 | Effect of Changes in Composition Design on Properties and Defect Structure of Crystalline Sm-doped ZrO2
|
2,67 | 8,00 | Effect of composition changes on properties and defect structure of crystalline Sm-doped ZrO2
|
1,56 | 14,04 | Comparison of various plasmachemical processes with respect to the gas temperature
|
0,00 | 0,00 | DEPOSITION OF THIN FILMS IN ATMOSPHERIC PRESSURE GLOW DISCHARGE IN N2 + HMDSO + O2 ATMOSPHERE
|
0,00 | 0,00 | DEPOSITION OF THIN FILMS IN ATMOSPHERIC PRESSURE HOMOGENEOUS DISCHARGE
|
0,00 | 0,00 | DEPOSITION OF THIN FILMS IN ATMOSPHERIC PRESSURE HOMOGENOUS DISCHARGE IN N2 + HMDSO + O2 ATMOSPHEREIN N2 + HMDSO + O2 ATMOSPHERE
|
0,00 | 0,00 | DEPOSITION OF THIN FILMS IN ATMOSPHERIC PRESSURE HOMOGENOUS DISCHARGE IN N2 + HMDSO + O2 ATMOSPHERE
|
6,65 | 33,23 | Application of spectroscopic imaging reflectometry to analysis of area non-uniformity in diamond-like carbon films
|
13,42 | 107,38 | Carbon Nanotubes Functionalized in Oxygen and Water Low Pressure Discharges used as Reinforcement of Polyurethane Composites
|
0,00 | 0,00 | Multiscale modelling of nanoindentation test in nickel crystal
|
0,00 | 0,00 | Microstructure and Micromechanical Properties of As-cast Mg-Sn-Ca and Mg-Sn-Mn Alloys
|
18,25 | 18,25 | Mechanical properties of superhard TiB2 coatings prepared by DC magnetron sputtering
|
1,91 | 13,35 | Laser Ablation Time-of-Flight Mass Spectrometry LA-TOF-MS of Nitrogen Doped Diamond-Like Carbon DLN Nano-Layers
|
2,15 | 12,87 | Organosilicon thin films deposited by plasma enhanced CVD: Thermal changes of chemical structure and mechanical properties
|
9,73 | 19,45 | Properties of the carbon thin films deposited by thermionic vacuum arc
|
0,00 | 0,00 | Plasma deposition of doped Diamond-like carbon nano layers. Process modeling and prediction using Artificial Neural Networks
|
0,00 | 0,00 | Polyurethane composite with carbon nanotube filler and its properties
|
0,00 | 0,00 | Preparation of protective coatings on polycarbonate from CH4/HMDSZ mixture using PECVD
|
0,00 | 0,00 | Plasma enhanced CVD of thin films using hexamethyldisiloxane and octamethyltetrasiloxane monomers
|
0,00 | 0,00 | Study of Local Mechanical Preoperties of Magnesium based Alloys
|
12,46 | 62,31 | Surface modification of polycarbonate in homogeneous atmospheric pressure discharge
|
0,00 | 0,00 | Study of the indentation size effect using depth sensing indentation and continuous stiffness measurement techniques
|
0,00 | 0,00 | Tribological Properties and Characterization of the Nanostructured Carbon Thin Films Deposited by Thermionic Vacuum Arc Technology
|
4,68 | 9,36 | Scanning probe microscopy analysis of delaminated thin films
|
0,00 | 0,00 | Studying an influence of a nucleation phase on nanocrystalline diamond film properties
|
0,00 | 0,00 | Study of DLC Coatings Deposited on Plastic Substrates
|
0,00 | 0,00 | Studium DLC vrstev na plastových substrátech
|
0,00 | 0,00 | Study of Mechanical Properties of NCD Coatings
|
19,45 | 19,45 | Thermoionic vacuum arc (TVA) deposited tungsten thin film characterization
|
0,00 | 0,00 | Silicon-oxide Containing Diamond-like Carbon Coatings Prepared Using Plasma Enhanced Chemical Vapor Deposition
|
0,00 | 0,00 | Study of depth sensing indentation method using well defined standard and multilayer NbN/C-N coatings
|
0,00 | 0,00 | Surface barrier discharge at atmospheric pressure used for deposition of protective coatings
|
0,00 | 0,00 | RF plasma pencil - charakteristics and application
|
0,00 | 0,00 | SEM/EBSD Study of Indentation Induced Twinning in HCP Metals
|
0,00 | 0,00 | Study od Mechanocal Properties of Diamond-like Crabon and Nanocomposite Diamond Coatings Prepared by Several Different Deposition Techniques
|
0,00 | 0,00 | Thermomechanical Stability of the p-i-n Solar Cells Studied by Depth Sensing Indentation Technique
|
0,00 | 0,00 | Application of Surface Barrier Discharge for deposition of Protective Coatings and Plasma Activation of Surfaces
|
0,00 | 0,00 | *Způsob realizace polyreakcí, plazmo-chemických polyreakcí, jejich modifikace a modifikace makromolekulárních látek plazmovou tryskou s dielektrickou kapilárou obepnutou dutou katodou
|
0,00 | 0,00 | ZrO2 - Yb2O3 System as an Alternative Electrolyte for Planar Intermediate Solid State Fuel Cells (IT-SOFCs)
|
0,00 | 0,00 | *Způsob realizace polyreakcí, plazmo-chemických polyreakcí, jejich modifikace a modifikace makromolekulárních látek plazmovou tryskou s dielektrickou kapilárou obepnutou dutou katodou
|
0,00 | 0,00 | Application of surface barrier discharge for deposition of protective coatings at atmospheric pressure
|
0,00 | 0,00 | Application of Surface Barrier Discharge for deposition of Protective Coatings and Plasma Activation of Surfaces
|
Back
(c) Michal Bulant, 2011